Blog

It's not just sunscreen. Here's everything going into your pool on a busy summer day and what it does to your chemistry. You slather on sunscreen, hop in the pool, and an hour later your water looks a little hazy or your chlorine reading is lower than it should be. Is sunscreen actually the problem? Sort of... but it's only part of a bigger story. Every swimmer brings a small cocktail of oils, lotions, and bodily byproducts into the water, and on a busy summer day in St. George that cocktail adds up fast. What's actually going into the water? Think about everything on a swimmer's skin before they jump in: sunscreen, body lotion, deodorant, hair products, makeup, and just plain sweat and skin cells. None of it disappears, it all goes into the pool, and your filtration and chemical system has to deal with it. What this actually does to your pool. -Cloudy or hazy water: Oils and organic residue scatter light and can overwhelm filtration, especially with heavy bather load on hot days. -Greasy ring at the waterline: Sunscreen oils and body oils float and accumulate where water meets tile. A telltale sign of high lotion/oil load! -Strong "chlorine" smell: Actually chloramines forming as chlorine reacts with sweat and sunscreen byproducts, a sign chlorine is overworked, not overdosed. -Chlorine reads low despite recent dosing: Heavy bather load consumes free chlorine faster than usual, especially combined with our already-fast UV burn-off. -Algae appearing despite normal chlorine levels: Phosphates from sunscreen and lotion are feeding algae growth even when chlorine looks adequate on a test strip. FUN FACT- A pool party with 15 guests can consume more chlorine in an afternoon than a week of normal swimming. Why this matters more here than almost anywhere... In most climates, this is a minor seasonal nuisance. In southern Utah, it compounds with everything else working against your pool in summer: -UV index is among the highest in the country for much of the summer. Families reapply sunscreen constantly which means more product entering the water per swim session than in milder climates. -High elevation UV degrades chlorine quickly on its own. Add the extra chlorine demand from sunscreen and sweat byproducts, and your margin for error shrinks fast. -Phosphates and organic material break down and feed algae faster in 85–90°F water than in a cooler pool, so the same sunscreen load causes more trouble here. -A pool that's swimmable nine months a year naturally accumulates more sunscreen and lotion residue over a season than a pool used for three summer months elsewhere. If your pool is consistently hazy, has a persistent waterline ring no amount of brushing seems to fix, or keeps trending toward algae despite chlorine and pH looking fine, it's worth getting a full water panel rather than guessing. Phosphate and chloramine levels require testing most home kits don't cover well, and an enzyme or clarifier treatment dosed incorrectly can be a wasted expense. Schedule a complimentary pool analysis with us here and get your pool back this summer!

Every summer, we get a version of the same phone call. A homeowner went on vacation, got busy with work, or figured the pool could handle itself for a couple of weeks. Now it's green, maybe black, and they want to know what it's going to take to fix it. The answer is almost always more time and money than they expect, and more than they would have spent if they'd kept up with maintenance in the first place. This isn't a scare tactic. It's a straightforward look at what neglect actually costs in our climate, told through a scenario that plays out dozens of times every summer across St. George, Hurricane, and Washington City. What regular maintenance actually costs. For context, here's what that same pool costs to maintain properly through the summer — the version where none of this happens. Regular maintenance $50 Average cost per week for a professionally serviced pool in southern Utah, including chemicals and labor. Over a 14-week summer: roughly $700 total. ✗ One remediation $600+ Average cost of a single algae remediation after two weeks of neglect in peak summer. Plus 4–5 days without swimming. Plus the stress. The math isn't complicated. But beyond the dollar figure, there's something harder to put a price on: you miss swimming days. In a climate where the pool is genuinely usable for eight or nine months of the year, that matters! Why southern Utah punishes neglect faster than anywhere else A pool in a moderate climate might take three or four weeks of neglect to turn visibly green. In St. George in July, it can happen in five to seven days. Here's why: We sit above 2,700 feet. Higher elevation means stronger UV radiation, which destroys chlorine significantly faster than at sea level. A pool that holds a safe chlorine level for five days in April may lose it in two days in July. Algae thrives in warm water. A southern Utah pool in July can reach 88–92°F without a chiller. That's near-ideal algae growing conditions, around the clock. More swimmers mean more sunscreen, sweat, and organic material. These raise phosphate levels, which feed algae and consume chlorine rapidly. When water evaporates quickly in the desert heat, it leaves calcium behind. This scales tile and surfaces, making them rougher and rough surfaces are where algae anchor and hide. What prevention actually looks like Avoiding a summer remediation doesn't require much… it just requires consistency. The homeowners who never have a crisis are almost always doing the same few things: Testing water chemistry twice a week from June through August, not once a week Adding chlorine on a consistent schedule rather than waiting until levels test low Using a stabilizer (cyanuric acid) to protect chlorine from UV burn-off Not skipping service before or after a vacation (that's when most neglect windows open) Scheduling a professional service at least twice a month in summer even when DIY-maintaining the rest of the time When to call before it gets worse If your water is starting to look hazy or slightly green, don't wait. The difference between catching it at "hazy" versus "visibly green" can be hundreds of dollars and several swimming days. A same-week service call at the first sign of trouble is almost always cheaper than a full remediation a week later. We offer a Complimentary Pool Analysis! So if you're not sure whether you have a problem, that's a low-stakes way to find out. Call today (435) 421-9670 or schedule online here.

What Happens to Your Southern Utah Pool When Temps Hit 110°F? Most pool care advice was written for Phoenix. Or Florida. Or somewhere reasonable. St. George, Ivins, and Hurricane sit at a different level… we're talking 110°F ambient air, intense high-desert UV, and months where your pool water can push 90°F on its own! That combination does things to pool chemistry and equipment that most homeowners don't expect until it's too late. Here's a straightforward breakdown of the five biggest things that go wrong when the heat peaks and the simple actions that keep your pool swimmable all summer long. The five things that go wrong in extreme heat Chlorine burns off fast- UV and heat destroy free chlorine at an accelerated rate. A pool that needed 3 ppm on Monday may test near zero by Wednesday, with no visible sign anything is wrong. Evaporation spikes- A St. George pool can lose 1.5–2 inches of water per week in peak summer. As water evaporates, the minerals and chemicals left behind become concentrated and unbalanced. Algae blooms overnight- Warm water, low chlorine, and high phosphate loads (from sunscreen and sweat) are the perfect recipe. An algae bloom can go from invisible to visibly green in 24–36 hours. Equipment runs harder- Pumps and filters work overtime in hot weather. Seals can crack, O-rings dry out, and motors overheat , especially if the equipment is in direct sun without shade. pH climbs with temperature- Warmer water naturally drives pH upward. High pH makes chlorine far less effective! Even when the chlorine level looks fine on a test strip. This is one of the most common reasons pools go green despite regular chemical additions. These problems happen in every hot climate. But southern Utah layers on two extra challenges that most pool guides don't address: Elevation + UV intensity. St. George sits between 2,700 and 3,000 feet. Higher elevation means less atmospheric filtering of UV radiation. UV is the primary driver of chlorine photodegradation so your chlorine is burning off faster here than it would at sea level, even at the same temperature. Hard water. Washington County water has some of the highest calcium hardness levels in the state. When water evaporates rapidly in summer, it leaves calcium behind. Over a hot season, you can develop heavy scaling on surfaces and tile, clogged filters, and cloudy water that won't clear no matter how much you shock it. "A pool that tested fine on Friday can be a green swamp by Sunday if the heat spikes and the chlorine runs out." Your summer heat prep checklist None of this is catastrophic if you stay ahead of it. Here's what we recommend for local pool owners heading into the hot stretch: Chemistry Test water chemistry at least twice a week from June through August. Not once a week like the off-season. Keep free chlorine between 3–5 ppm (higher end than the standard 1–3 ppm to account for rapid burn-off). Add a stabilizer (cyanuric acid) to protect chlorine from UV — target 40–80 ppm. If yours is already high, partial drain and refill may help. Check pH every test; target 7.2–7.4 and expect it to drift upward in heat. Test calcium hardness monthly and use a sequestering agent to prevent scale when levels are high Water level & evaporation Top off the pool weekly. Evaporation in peak summer can drop water levels enough to cavitate your pump. Consider a liquid solar cover or a physical cover when the pool isn't in use; both dramatically cut evaporation losses! If you use a physical cover, remove it during cooler parts of the day to prevent heat buildup in the water. Equipment Run your pump and filter during the coolest hours (early morning and late evening) to reduce motor heat stress and lower electricity costs. Shade your equipment pad if possible, a simple roof overhang or shade sail can significantly extend pump and filter life. Inspect O-rings and seals at the start of summer; the heat and UV from the previous year dry them out. Clean your filter more frequently. *Homeowners who do a great job maintaining chemistry in spring let things slide when temperatures peak in July… ironically, the exact time when the pool needs more attention, not less. Set a twice-weekly reminder on your phone for chemical checks from June 15 through around August 31. When to call in a professional If you're testing twice a week and still struggling to hold chlorine, or if your water is persistently cloudy despite correct chemistry, the issue is likely one of a few things: a high cyanuric acid level that's "locking up" your chlorine, a phosphate load that's feeding algae growth faster than chlorine can kill it, or a filtration problem. All three require a proper water analysis to diagnose… test strips won't get there. We offer complimentary water testing with any service call. A 10-minute test at the start of summer can prevent a $400–$600 algae cleanup later on. Give us a call or text 435-421-9670 to schedule a complimentary pool analysis!

Keep your kids safe and swimming all spring and summer long with these Southern Utah Pool Safety Tips! Living in Southern Utah means sunshine, warm weather, and a lot of time spent around the pool. Whether it’s your backyard oasis or a neighborhood pool, safety should always come first—especially when kids are involved. As a local pool service company, we’ve seen firsthand how quickly small issues can turn into dangerous situations. The good news? A few simple habits can make a huge difference. 1. Never Leave Kids Unattended, Not Even for a Minute! This might sound obvious, but it’s the most important rule. Drowning is often silent and can happen in seconds. Always have a designated adult watching the pool , especially during parties or family gatherings. 2. Install Barriers and Fencing In Southern Utah, many homes have open backyard layouts, which can be risky for young kids. A proper pool safety setup should include: A self-closing, self-latching gate A fence at least 4 feet high or a reliable pool cover (ask us about or recommendations!) Locked access points when the pool isn’t in use This is one of the most effective ways to prevent accidents. 3. Be Extra Careful in Southern Utah Conditions Our environment adds some unique risks: Extreme heat can lead to dehydration quickly Wind and dust can reduce visibility in the water Uncovered pools can collect debris, making hazards harder to see Make it a habit to: Keep kids hydrated Check water clarity before swimming Remove debris regularly 4. Maintain Proper Water Chemistry This is one a lot of people overlook. Unbalanced water can cause: Skin and eye irritation Bacteria growth Cloudy water (which makes it harder to see swimmers underwater) Keeping your pool clean and clear isn’t just about looks, it’s about safety. Final Thoughts Pools are one of the best parts of living in Southern Utah, but they come with real responsibility. The goal isn’t to make things stressful... it’s to create a safe environment where your family can relax and enjoy the water with confidence! Want Help Keeping Your Pool Safe and Clean? At Heatwave Pools & Spas, we don’t just clean pools! If you’d like a complimentary professional pool analysis , we’ll check your water, equipment, and overall safety so you can have peace of mind. Reach out today to get scheduled.

Residential vs. Commercial Pool Care: What’s the Difference? When it comes to pool maintenance, not all pools are created equal. Residential and commercial pools may look similar on the surface, but the level of care, regulations, and upkeep required are very different. Understanding these differences can help you choose the right service and avoid costly issues down the line. 1. Usage & Wear The biggest difference comes down to how often the pool is used. Residential pools are typically used by a single family or small group, meaning less daily wear and tear. Commercial pools (hotels, apartments, community centers) see high traffic daily, which leads to faster buildup of debris, bacteria, and chemical imbalance. More usage = more frequent and detailed maintenance. 2. Health & Safety Regulations Commercial pools must follow strict health and safety standards to protect the public. Residential pools: No formal regulations beyond general safety and cleanliness. Commercial pools: Must meet local health codes, pass inspections, and maintain proper chemical levels at all times. This is where professional expertise really matters! Especially working with a CPO-certified technician who understands compliance. 3. Frequency of Service Because of the higher demand and stricter standards: Residential pools are typically serviced once per week. Commercial pools often require multiple visits per week—or even daily checks. Skipping service on a commercial pool can quickly lead to unsafe conditions or even temporary closure. 4. Equipment & System Complexity Commercial pools usually have larger and more complex systems, including: High-capacity pumps and filters Automated chemical feeders Advanced circulation systems Residential pools are generally simpler, making them easier to maintain… but still require consistent care to stay clean and safe! 5. Liability & Responsibility With commercial pools, there’s more at stake. Property managers are responsible for guest safety and compliance Improper maintenance can lead to health risks, liability issues, or fines That’s why having a reliable, professional pool service is essential for commercial properties. So… Which Service Do You Need? Whether you own a backyard pool or manage a commercial property, the goal is the same: Clean, safe, and stress-free swimming

What Is an Acid Wash and When Does Your Pool Need One? If your pool is looking stained, discolored, or just won’t come clean no matter how much you brush, it might be time for an acid wash. In St. George and Southern Utah, the combination of heat, minerals, and heavy pool use can take a toll on your pool’s surface over time. An acid wash is a powerful way to restore your pool and bring it back to a like-new finish. What Is an Acid Wash? An acid wash is a deep cleaning process where a diluted acid solution is applied to the surface of your pool to remove: Stubborn algae stains Mineral deposits Calcium buildup Discoloration and rough patches This process strips away a very thin layer of the pool’s surface, revealing a fresh, clean layer underneath. Signs Your Pool May Need an Acid Wash Not every pool needs an acid wash, but here are some common signs: Stains that won’t come off with brushing or chemicals Yellow, green, or dark spots on plaster Rough or chalky surfaces Long-term discoloration from minerals or algae A pool that looks dull or aged These issues are especially common in Southern Utah, where hard water and high temperatures can accelerate buildup. Why You Shouldn’t DIY an Acid Wash While it might be tempting to try it yourself, acid washing is not a typical DIY project. It involves strong chemicals and precise timing. Improper acid washing can: Damage your pool surface Cause uneven coloring or streaking Shorten the lifespan of your plaster Be dangerous without proper safety equipment That’s why hiring a professional for acid washing in St. George is the safest and most effective option. Benefits of Professional Acid Washing Working with a professional pool service ensures your pool is treated correctly and safely. A professional will: Properly drain and prep your pool Use the correct acid mixture and technique Evenly clean the entire surface Protect your pool from damage The result is a pool that looks brighter, cleaner, and refreshed, often in just a day. How Often Should You Acid Wash a Pool? Acid washing is not something you should do frequently. Because it removes a thin layer of plaster, it’s typically only recommended every 3–5 years, depending on your pool’s condition. Routine pool maintenance in Southern Uta h can help extend the time between acid washes and keep your pool looking its best. Restore Your Pool with Heatwave Pools & Spas If your pool is looking worn, stained, or just not as bright as it used to be, an acid wash might be the solution. At Heatwave Pools & Spas, we provide professional acid washing, pool cleaning, and maintenance in St. George and Southern Utah to keep your pool in top condition year-round. Ready to refresh your pool? Contact Heatwave Pools & Spas today to learn more about our acid wash services and get your pool looking like new again.

Why It Matters to Hire a Pool Service That Can Also Handle Repairs  When it comes to maintaining your pool, routine cleaning is only part of the equation. Many homeowners in St. George and Southern Utah don’t realize how important it is to hire a pool service that can also handle pool repairs, heater repairs, and system updates. Choosing a full-service company can save you time, money, and a lot of unnecessary stress. One Team, Start to Finish When your pool service company can handle both maintenance and pool repairs, you don’t have to juggle multiple vendors. If something goes wrong; whether it’s a leak, pump issue, or malfunctioning filter, the same team already knows your system and can fix it quickly. This leads to: Faster diagnosis More efficient repairs Less downtime for your pool Prevent Small Issues from Becoming Expensive Repairs Regular weekly service isn’t just about keeping your pool clean. It's also about catching problems early! A trained professional can spot signs of wear and tear before they turn into costly repairs. Things like: Unusual pump noises Small leaks Inconsistent water circulation Early signs of heater failure Catching these early can prevent major pool repairs in Southern Utah, saving you from expensive breakdowns. Expertise in Heater Repairs In St. George, having a working pool heater can extend your swim season and add comfort year-round. But heaters are one of the most common pieces of equipment to fail without proper maintenance. A pool company that offers heater repairs can: Diagnose issues quickly Improve efficiency Extend the life of your system Instead of replacing your heater prematurely, the right repair can often get it running like new again. Keep Your System Updated and Efficient Technology in pool systems is constantly improving. From energy-efficient pumps to automated controls, system updating can make your pool easier to manage and more cost-effective to run. A full-service pool company can recommend and install upgrades such as: Variable-speed pumps Updated filtration systems Automation for cleaning and temperature control These updates not only improve performance but can also lower your monthly energy costs. Why This Matters in Southern Utah The extreme heat in Southern Utah puts extra strain on your pool and its equipment. Pumps run longer, chemicals burn off faster, and systems work harder to keep everything balanced. That’s why it’s essential to have a pool service provider who can handle both maintenance and repairs in St. George, so your pool stays in top condition no matter the season. Choose a Pool Service That Does It All Hiring a company that only cleans your pool can leave gaps in care. A full-service provider ensures your pool is not only clean but also functioning properly and efficiently. At Heatwave Pools & Spas, we offer: Weekly pool maintenance Expert pool repairs Reliable heater repairs Professional system updating Looking for reliable pool service in St. George or Southern Utah? Contact Heatwave Pools & Spas today and let us keep your pool clean, efficient, and built to last.

How to Clear a Green Pool in Southern Utah (and why hiring a professional matters). If your St. George pool has turned green, you’re not alone. In Southern Utah, the heat and sun can quickly throw off your pool’s chemical balance, leading to algae growth and cloudy, green water. What Causes a Green Pool? A green pool is usually caused by algae, which thrives when chlorine levels drop or filtration isn’t working properly. Common causes include: Low or unbalanced chlorine levels Poor water circulation Dirty or clogged filters Skipping regular cleaning and maintenance Can You Fix It Yourself? While it’s possible to treat a green pool on your own, it often takes: Multiple chemical treatments Constant water testing Brushing and vacuuming Filter cleanings Without the right balance, it’s easy to overcorrect and create bigger (and more expensive) problems like damaged equipment or irritated skin. Why Hire a Professional Pool Service? Hiring a professional for pool cleaning in St. George and Southern Utah ensures the job is done quickly and correctly the first time. A professional will: Accurately test and balance your water Use the right amount of chemicals Deep clean algae from walls and surfaces Inspect and protect your pool equipment Most importantly, they can turn your pool from green to crystal clear faster, saving you time, money, and frustration. Keep Your Pool Clear All Season Once your pool is clean, regular maintenance is key. A weekly pool service in St. George helps prevent algae from coming back and keeps your water safe and swim-ready all summer long.  Need help clearing a green pool? Contact Heatwave Pools & Spas today to learn more about our professional pool service in Southern Utah.